Osco Yard & Shop with Some of our Equipment



The importance of testing for your thermal grouting project in Edmonton

The best way to ensure the longevity of distribution lines and optimize electrical transmission is to install thermal grout. Implementing thermal grouting for concrete repairs may also be a viable option for some of your projects. In order to ensure the quality of thermal grouting, Edmonton engineers and project coordinators must use a reputable company.

Thermal grout is made from a variety of materials that vary according to the project-specific requirements. Testing the grout is crucial, and planning thermal grouting for any project is an essential aspect of the process. If this type of job is not implemented properly, the results can be costly.


The thermal grout you choose for your project is an important component. Determining the right balance of materials for the grout will have a major impact on how well it does its job. If the mixture used is not ideally suited to the other components involved, the finished product will be less efficient than it should be.

The following complications might arise if proper testing is not done:

  • Violation of Local Codes: To remain compliant with local codes, engineers and concrete companies in Edmonton must ensure that they are using the correct materials and components for every project. The failure to do so could result in fines or other penalties.
  • Poor Performance: If you don’t use the right combination of thermal grout, the grout might not perform as it was meant to do. If the thermal grout you are using is being installed around conduits, for example, then the heat generated by the conduits might not be dissipated into the ground as well as it should.
  • Safety Hazards: When an improper mix of materials is used to produce thermal grout, the outcome could lead to a faulty foundation. That could pose a variety of safety hazards based on the capacity in which the grout is being used. An example of this would be an ultimately unsafe environment after the wrong blend of thermal grout is utilized for concrete repair. Depending on the purpose that the concrete serves, those in the area may be at risk if the concrete structure degrades as a result of the poor planning of your thermal grouting project.


The bottom line is that an inappropriate mix of thermal grout materials will likely result in a less efficient and costlier outcome. In some cases, you could even be putting the public at risk.

When mixed, applied, and tested properly, thermal grout is a superior product that may be used for many projects. However, it’s important to choose a concrete company that strictly adheres to industry standards and best practices. Whether you require thermal grouting for conduit efficiency, better heat dissipation from distribution lines, or commercial concrete repair, Edmonton project planners can trust OSCO Mudjacking & Shotcreting, Ltd.

Contact us online or call 780-469-1234 today for thermal grouting installation in Edmonton. You can also request an estimate online.

You can also call our toll free number to reach us: 1-866-661-OSCO (6726).